• WideBody_1
  • WideBody_2
  • WideBody_4
  • WideBody_3
  • Palm-BarrelNut_locktite

Widebody Hand Guard®

0 Reviews
0 out of 5

The Widebody Hand Guard®

The Widebody Hand Guard®, builds on the same triangular profile as our innovative Palm Handguard® with a new Widebody profile that conforms to the palm of your hand, and provides a wide, flat surface to lay on a shooting bag or other support.

Perfect for Hunters, Precision, or 3-Gun competitors, the 15” length features MLOK™ slots along the upper-side flat, and three rows of slots on the bottom flat.

The Widebody Hand Guard® is made from 6061-T6 Aluminum extrusion that is hard coat anodized black, and includes a Barrel Nut made from alloy steel with a Melonite® finish.

AR15 size only at this time.

 

Clear

$98.95

The Widebody Hand Guard®

The Widebody Hand Guard®, builds on the same triangular profile as our inovative Palm Handguard® with a new Widebody profile that conforms to the palm of your hand, and provides a wide, flat surface to lay on a shooting bag or other support.

Perfect for Hunters, Precision, or 3-Gun competitors, the 15” length features MLOK™ slots along the upper-side flat, and three rows of slots on the bottom flat.

The Widebody Hand Guard® is made from 6061-T6 Aluminum extrusion that is hardcoat anodized black, and includes a Barrel Nut made from alloy steel with a Melonite® finish.

Features:

  • MLOK™
  • 15” Length available
  • Includes Widebody Hand Guard® Barrel Nut
  • Includes 4 clamp screws
  • 2 vertical set screws, to control linear movement
  • Thread lock for simple and quick installation
  • Material:  6061-T6 Aluminum extrusion
  • Finish: Black hardcoat anodized, matte finish
  • Dimensions
    • Height: 2.00″
    • Width at widest part: 2.26″
    • Inside Height: 1.625″
    • Inside Width: 1.35″

SKU: WHG-V-15M — MLOK™

Application

AR15

Slot Style

KeyMod, MLOK™, Smooth

Caliber

.223 Rem, .556 mm

Color

Finish

Hard Coat Anodized

Material

6061-T6 Aluminum Extrusion

Overall Length

15"

Height

2.00"

Width

2.26"

Inside Height

1.625"

Inside Width

1.35"

UPC Code

812058030911

Reviews

There are no reviews yet.

Be the first to review “Widebody Hand Guard®”

Luth-AR Widebody Hand Guard® Installation

  1. Insert the barrel into the upper receiver.
  2. Apply a light amount of moly grease to the threads of the upper receiver.
  3. Slide the Widebody Hand Guard®  barrel nut over the barrel until it contacts the upper receiver threads.
  4. Hand tighten the barrel nut until snug against the upper receiver.
  5. Using an 10″ adjustable wrench or a 1-3/16″ open end wrench, tighten the barrel nut to the upper receiver to approximately 35 foot pounds of torque.
  6. Slide the Widebody Hand Guard® over the barrel nut. Ensure the Picatinny rail is aligned with the Picatinny rail on the upper receiver and fully seated.
  7. Apply a small amount of thread lock to the four 10/32 socket head cap screws on the bottom rib of the Widebody Hand Guard®.
  8. Tighten the cap screws by alternately tightening each cap screw a small amount to distribute equal pressure until the Widebody Hand Guard® is completely and equally tight. The cap screws should be torqued to approximately 35-40 inch pounds.
  9. There are two retaining machine screws on the lower portion of the hand guard that screw into the barrel-nut groove (just above the 4 rib screws). Apply a small amount of thread lock to the two screws and tighten.This will assist in retaining the hand guard from slipping forward during use.
1