• Privacy Policy

No products in the cart.

Sign-up below for New Product Announcements and Offers
  • Privacy Policy
  • HG-9-Triple
  • HG-V-9K
  • HG-V-15_K_Closeup
  • HG-V-9M
  • HG-V-15_M_Closeup
  • HG-S-9
  • PalmHG_BarrelNut
  • Profile_Drawing

Palm Handguard 9″ KeyMod, MLOK™ or Smooth

0 Reviews
0 out of 5

The Palm Handguard®, free float tube features a triangular profile that conforms to the palm of your hand giving you a secure and comfortable grip on your AR15. The vented version of the Palm Handguard® provides a Picatinny top rail and KeyMod or optionally MLOK™ slots along both upper sides, as well as a row of slots along the bottom to accommodate accessories such as a bipod. The lower sides are adorned with the Luth-AR “Double L”, and Cartridge lightning/cooling cuts to further reduce weight and provide heat dissipation with a distinctive good look. The Smooth version of the Palm Handguard® provides a Picatinny top rail for attaching scopes and accessories.

Clear

From: $55.95

Parts Schematic

The Palm Handguard®, free float tube features a triangular profile that conforms to the palm of your hand giving you a secure and comfortable grip on your AR15 or Pistol Caliber Carbine. The vented version of the Palm Handguard® provides a Picatinny top rail and KeyMod or optionally MLOK™ slots along both upper sides, as well as a row of slots along the bottom to accommodate accessories such as a bipod. The lower sides are adorned with the Luth-AR “Double L”, and Cartridge lightning/cooling cuts to further reduce weight and provide heat dissipation with a distinctive good look. The Smooth version of the Palm Handguard® provides a Picatinny top rail for attaching scopes and accessories.

The Palm Handguard® is made from 6061-T6 Aluminum extrusion that is hard anodized black. The Palm Handguard® includes a Palm Handguard® barrel nut made from heat treated alloy steel with a manganese phosphate finish.

 

FEATURES:

  •  9″ Length
  • Picatinny flat-top rail
  •  MLOK™, Keymod or Smooth available
  •  Made from 6061-T6 Aluminum extrusion
  •  Hard coat anodized black
  •  Luth-AR “Double-L” and Cartridge slots lightening cuts
  •  Includes heat treated alloy steel barrel nut with a manganese phosphate finish

*Not available for AR10, .308

KeyMod SKU: HG-V-9K

MLOK™ SKU: HG-V-9M

Smooth SKU: HG-S-9

Application

AR15, M-16, Rifle, Carbine, Pistol, Pistol Caliber Carbine

Slot Style

KeyMod, MLOK™, Smooth

Available Colors

Black

Material

6061-T6 Aluminum

Caliber

.223 Rem, .556 mm, 9mm

Overall Length

9"

Width

1.75"

Inside Width

1.325"

Height

1.625"

Inside Height

1.625"

Luth-AR Palm Handguard® Installation

  1. Insert the barrel into the upper receiver.
  2. Apply a light amount of moly grease to the threads of the upper receiver.
  3. Slide the Palm Handguard  barrel nut over the barrel until it contacts the upper receiver threads.
  4. Hand tighten the barrel nut until snug against the upper receiver.
  5. Using an 10″ adjustable wrench or a 1-3/16″ open end wrench, tighten the barrel nut to the upper receiver to approximately 35 foot pounds of torque.
  6. Slide the Palm Handguard over the barrel nut. Ensure the Picatinny rail is aligned with the Picatinny rail on the upper receiver and fully seated.
  7. Tighten the 10/32 socket head cap screws on the bottom of the Palm Handguard with a 9/64″ Allen wrench. 
  8. Tighten the cap screws by alternately tightening each cap screw a small amount to distribute equal pressure until the Palm Handguard is completely and equally tight. The cap screws should be torqued to approximately 35-40 inch pounds.

0