MBA-3 Carbine Buttstock

From: $159.95

Product Description

  • Fully Adjustable Carbine Buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – This is our carbine stock
  • The MBA-3 requires a Carbine buffer tube, either Mil-Spec or Commercial. Please review the information provided in the Requirements tab. This stock works with both carbine Commercial and Mil-Spec tubes/assemblies.
  • Additional 1″ height on cheek rest
  • 3-axis Adjustable Butt Plate Assembly extends additional 1 1/16″ length of pull and includes the following movement:
    1. Horizontal for linear adjustment (i.e. length of pull)
    2. Vertical for a perfect butt plate fit into the curvature of the shoulder.
    3. Lateral adjustment for a ½ inch left or right cast
    4. This butt plate assembly is interchangeable with the original MBA-1 Buttstock
  • Includes a Picatinny Rail on the bottom rear of the Stock Body to attach your choice of many accessories.
  • Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. This also allows you to secure the stock in your favorite position.
  • The MBA-3 comes with a  medium soft rubber recoil pad, Duro 85.
  • The Luth-AR MBA-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.
  • Fits all .223 and .308 AR carbine style rifles
  • Super Strong Glass Filled Nylon
  • Easy to replace and quick to install
  • Uses 4 out of the 6 positions on a mil-spec or commercial tube
  • If you require a butt stock that will utilize the first 2 holes of the buffer tube to fully collapse, you can remove the cheek rest from the MBA-3, or order an MBA-4, order an MBA-4 and a 3-axis buttplate or order an MBA-5 buttstock.

Features

  • Ergonomic
  • Adapts To Existing Commercial and Mil-Spec Buffer Tubes
  • Certain after Market Commercial Buffer Tubes that exceed  1.172″ diameter, may not fit
  • The MBA-3 and MBA-4 are available in Black or Flat Dark Earth
  • The vertical struts for the MBA-3 are fixed, therefore the cheek piece is not reversible like the MBA-1 however the cheek piece itself is designed with a cheek pad for left-handed use
  • Caution: the MBA-3 and MBA-4 Carbine buttstocks are not designed to be used with Large Bore Calibers such as .338 Lapua or .50 BMG applications. See our MBA-1 and MBA-2 Rifle buttstocks as alternatives.
  • The MBA-3 Carbine buttstock is NOT interchangeable with A2 standard buffer tube. You will need to purchase a MBA-1 or MBA-2 Rifle buttstock to fit A2 tubes 

Compatible Buffer Assemblies:

  • .223 Mil-Spec Carbine Buffer Assembly
  • .223 Commercial Carbine Buffer Assembly
  • .308 Mil-Spec Carbine Buffer Assembly
  • .308 Commercial Carbine Buffer Assembly

Additional Information

The MBA-3 does not include the following accessories, they can be purchased on our website separately in the Accessories section:

  • Sling Swivels (Side or Rear) Sold Separately, see below. Also see Tech-Tip Videos
  • Carbine Buffer tube
  • Carbine Buffer Body
  • Carbine Buffer Spring
  • Latch Plate
  • Lock Ring

Installation Notes:  

  • When tightening the anti-rattle set screw, be careful not to over tighten as the threaded insert may separate from the plastic stock body
  • When sliding the buttstock onto a 6-position buffer tube, the lock pin has a notch in the head of the lock pin that must line up with a tab on the stock body. Once the slot and tab are lined up, the pin can be fully retracted allowing the buttstock to slide onto the tube. The MBA-3 should slide easily without resistance. If there is any resistance, the lock pin is not fully retracted. 
Luth-AR Note on Savage Rifles:
Our MBA-3 is designed to fit standard Mil-Spec and Commercial Tubes. Some Savage tubes have been found to be oversized making our stock fit very tightly. Please note that you may need to simply purchase a standard carbine tube in order for this to pair correctly. Note: Customers have reported that the MBA-3 or MBA-4 fit the buffer tube that comes on the new model 110 BA Stealth. If you have the older model 110 BA you may have to simply change the buffer tube.
SKU: MBA-3B — Black

SKU: MBA-3F — Flat Dark earth

SKU: MBA-3FF — Freedom Flag

Read more